No Link-Dependency Group - Dell PowerConnect 6224 Command Line Interface Manual

link-dependency group
Use the link-dependency group command to enter the link-dependency
mode to configure a link-dependency group
Syntax
link-dependency group
GroupId — Link dependency group identifier. (Range: 1–16)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
No specific guidelines
Example
console(config)#link-dependency group 1
console(config-linkDep-group-1)#

no link-dependency group

Use the no link-dependency group command to remove the configuration for
a link-dependency group.
Syntax
no link-dependency group
GroupId — Link dependency group identifier. (Range: 1–16)
•
Default Configuration
This command has no default configuration.
396
Link Dependency Commands
GroupId
GroupId