Show Link-Dependency - Dell PowerConnect 6224 Command Line Interface Manual

Example
console(config-linkDep-group-1)# no depends-on port-
channel 6

show link-dependency

Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [group
GroupId — Link dependency group identifier. (Range: Valid Group Id,
•
1–16)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
No specific guidelines
Example
The following command shows link dependencies for all groups.
console#show link-dependency
GroupId Member Ports
------- --------------------- ----------------------
------------
2 1/g1-1/g4
3 1/g5
5 1/g3-1/g4
402
Link Dependency Commands
GroupId
]
Ports Depended On
1/g8-1/g9
ch2
1/g10