Dell PowerConnect 6224 Command Line Interface Manual page 988

Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following examples display information about OSPF neighbors, in the
first case in a summary table, and in the second in a table specific to tunnel 1.
console#show ipv6 ospf neighbor
Router
ID Priority Intf Interface State Dead
ID Ti
me
--------- -------- ---- ----------- ------------- --
--
console#show ipv6 ospf neighbor interface tunnel 1
IP Address..................................... Err
ifIndex........................................ 619
OSPF Admin Mode................................
Enable
OSPF Area ID...................................
0.0.0.0
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Iftransit Delay Interval....................... 1
988
OSPFv3 Commands