Dell PowerConnect 6224 Command Line Interface Manual page 62

Command
password
show authentication
methods
show user accounts
show users login-history
username
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
ACL
Command
access-list
deny|permit
ip access-group
ip access-group <name>
out
mac access-group
mac access-list extended
mac access-list extended
rename
show ip access-lists
62
Command Groups
Description
Specifies a user password
Shows information about authentication
methods
Displays information about the local user
database
Displays information about login histories of
users
Establishes a username-based authentication
system.
Description
Creates an Access Control List (ACL) that is
identified by the parameter
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
Attaches a specified access-control list to an
interface.
Applies an IP based egress ACL on an Ethernet
interface or a group of interfaces.
Attaches a specific MAC Access Control List
(ACL) to an interface in a given direction.
Creates the MAC Access Control List (ACL)
name
identified by the
Renames the existing MAC Access Control List
(ACL) name.
Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
accesslistnumber.
parameter.
Mode*
UE
PE
PE
PE
GC
Mode*
GC
ML
GC or
IC
IC
GC or
IC
GC
GC
PE