Show Policy-Map - Dell PowerConnect 6224 Command Line Interface Manual

4
Drop
5
Drop
6
Drop
The following table lists the parameters in the examples and gives a
description of each.
Parameter
Interface
Intf Shaping Rate
Queue Mgmt Type
Queue
Minimum Bandwidth
Scheduler Type

show policy-map

Use the show policy-map command in Privileged EXEC mode to display all
configuration information for the specified policy.
494
QoS Commands
0
0
0
Description
The port of the interface. If displaying the global
configuration, this output line is replaced with a
global configuration indication.
The maximum transmission bandwidth limit for
the interface as a whole. It is independent of any
per-queue maximum bandwidth values in effect
for the interface. This value is a configured value.
The queue depth management technique used for
all queues on this interface.
An interface supports
n
(
Internal egress queue of the interface; queues 0–6
are available.
The minimum transmission bandwidth guarantee
for the queue, expressed as a percentage. A value of
0 means bandwidth is not guaranteed and the
queue operates using best-effort. This value is a
configured value.
Indicates whether this queue is scheduled for
transmission using a strict priority or a weighted
scheme. This value is a configured value.
Weighted
Weighted
Weighted
n
-1).The specific value is platform-dependent.
Tail
Tail
Tail
n
queues numbered 0 to