Setting The Display Brightness; Displaying Source Information; Changing The Input Display; Using The Music Optimizer - Onkyo HT-S5400 Instruction Manual

Setting the Display Brightness

You can adjust the brightness of the AV receiver's
display.
1
Press RECEIVER followed by DIMMER
repeatedly to select: dim, dimmer, or normal
brightness.
Tip
• (North American and Brazilian models) Alternatively,
you can use the AV receiver's DIMMER.

Displaying Source Information

You can display various information about the current
input source as follows.
1 Press RECEIVER followed by DISPLAY
repeatedly to cycle through the available
information.
The following information can typically be displayed.
Input source &
volume *1
Listening mode
Signal format *2
or sampling
frequency
Tip
• Alternatively, you can use the AV receiver's DISPLAY.
*1
When AM or FM radio is used, the band, preset number, and
frequency are displayed.
*2
If the input signal is analog, "Analog" is displayed. If the
input signal is PCM, the sampling frequency is displayed. If
the input signal is digital but not PCM, the signal format is
displayed. Information is displayed for about three seconds,
then the previously displayed information reappears.
En
32

Changing the Input Display

When you connect an -capable Onkyo component, you
must configure the input display so that
properly.
This setting can be done only from the front panel.
1
Press TV/CD, GAME or VCR/DVR.
"TV/CD", "GAME" or "VCR/DVR" appears on the
display.
2
Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input display.
■
TV/CD:
TV/CD
TAPE
■
GAME:
GAME ↔ DOCK
■
VCR/DVR:
VCR/DVR ↔ DOCK
Note
• DOCK cannot be selected for multiple input selectors at
the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time

Using the Music Optimizer

The Music Optimizer function enhances the sound quality
of compressed music files.
1
Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the display.
Tip
• Alternatively, you can use the remote controller's HOME
and arrow buttons.
• See "Music Optimizer" for more details
can work
→
DOCK
→
(➔ page 47).
(➔ page 44).