Using The Home Menu; Using The Sleep Timer - Onkyo HT-S5400 Instruction Manual

Using the Home Menu

The Home menu provides you quick access to frequently
used menus without having to go through the long
standard menu. This menu enables you to change settings
and view the current information.
The Home menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to the MONITOR OUT V or the COMPONENT
VIDEO OUT, use the AV receiver's display when
changing settings.
1 Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
2
Use / and ENTER to make the desired selection.
■
Input
You can select the input source while viewing the
information as follows: the name of input
selectors, input assignments.
Press ENTER to display the current input
source, followed by / to select the desired
input source. Pressing ENTER again switches
to the selected input source.
■
Audio
You can change the following settings: "Bass",
"Treble", "Subwoofer Level", "Center Level",
"Audyssey", "Dynamic EQ",
"Dynamic Volume", "Late Night", "Music
Optimizer", and "Cinema Filter".
See also:
• "Audyssey" (➔
• "Using the Audio Settings"
■
Info
*1
You can view the information of the following
items: "Input" and "Output".
■
Listening Mode
You can select the listening modes that are
grouped in the following categories:
"MOVIE/TV", "MUSIC" and "GAME".
Use / to select the category and
select the listening mode. Press ENTER to
switch to the selected listening mode.
Note
*1
Depending on the input source and listening mode, not all
channels shown here output the sound.
page 39)
page 43)
(➔
/ to

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
1
Press RECEIVER followed by SLEEP repeatedly
to select the required sleep time.
The sleep time can be set from 90 to 10 minutes in 10
minute steps.
The SLEEP indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about 5 seconds, then the
previous display reappears.
Tip
• If you need to cancel the sleep timer, press SLEEP
repeatedly until the SLEEP indicator goes off.
• To check the time remaining until the AV receiver sleeps,
press SLEEP. Note that if you press again on SLEEP as
the time being displayed is equal or inferior to 10 minutes,
the sleep timer will go off.
En
31