Connecting Components With Hdmi - Onkyo HT-S5400 Instruction Manual

Connecting Components with HDMI

Game console
Satellite/cable set-top box, etc.
Connect your components to the appropriate jacks. The default input assignments are shown below.
Jack
Input HDMI IN1
HDMI IN2
HDMI IN3
HDMI IN4
Output HDMI OUT
See also:
• "Connection Tips and Video Signal Path"
• "About HDMI" (➔
• "Using an RIHD-compatible TV, Player, or Recorder"
■
Audio return channel (ARC) function
Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the
AV receiver (➔ page 42).
• To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and "HDMI
Ctrl (RIHD)" is set to "On"
Tip
• To listen to audio received by the HDMI IN jacks through your TV's speakers:
– Set the "HDMI Ctrl (RIHD)" setting to "On" for an
– Set the "Audio TV Out" setting to "On"
setting to "Off".
– Set your Blu-ray Disc/DVD player's HDMI audio output setting to PCM.
– To listen to TV audio through the AV receiver, see "Connecting Your Components"
Note
• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV receiver or the sound may be cut off.
• When the "Audio TV Out" setting is set to "On"
volume, the sound will be output from the AV receiver's speakers, too. When the
page 42) to hear from speakers of
(➔
will produce sound while the TV's speakers are muted. To stop the AV receiver's speakers producing sound, change the settings,
change your TV's settings, or turn down the AV receiver's volume.
En
14
VCR or DVD recorder/Digital Video Recorder
Components
Blu-ray Disc/DVD player
VCR or DVD recorder/Digital Video Recorder
Satellite/cable set-top box, etc.
Game console
TV, projector, etc.
page 54)
(➔
page 56)
page 42).
(➔
(➔ page 42) when the TV is not compatible with
(➔
-compatible TV, by controlling the AV receiver's volume, the AV receiver's speakers
✔: Assignment can be changed
page 57)
(➔
-compatible TV.
page 42) to hear from your TV's speakers, by controlling the AV receiver's
"
HDMI Ctrl (RIHD)" setting is set to
TV, projector, etc.
Blu-ray Disc/DVD player
or the "HDMI Ctrl (RIHD)"
page 15).
(➔
page 35).
(➔
Assignable
✔
✔
✔
✔
" "
On