Onkyo HT-S5400 Instruction Manual page 30

Listening Mode
Dolby Digital
D o l b y D
Dolby Digital Plus *6
D o l b y D +
Dolby TrueHD
D o l b y T r u e H D
DTS
D T S
DTS-HD High
Resolution Audio
D T S – H D H R
DTS-HD Master
Audio
D T S – H D M S T R
DTS Express
D T S E x p r e s s
DSD *7
D S D
DTS 96/24
D T S 9 6 / 2 4
DTS-ES Discrete *8
E S D i s c r e t e
DTS-ES Matrix *8
E S M a t r i x
Neo:6
N e o N e o : : 6 6
N e o N e o : : 6 6 C i n e m a
N e o : 6 M u s i c
Note
*1 These listening modes cannot be selected during USB or iPod playback.
*2
When the input source contains the encoded front high channel, front high speakers output the sound.
*3 If there are no surround back speakers, Dolby Pro Logic II is used.
*4 Surround back speakers are not supported.
*5
Front high speakers are not supported.
*6 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*7 AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
sound according to the player. In that case, set the output setting on the player side to PCM.
*8 If there are no surround back speakers, DTS is used.
• The listening modes cannot be selected with some source formats.
En
30
Description
In this mode, audio from the input source is output without surround-sound
processing. The speaker configuration (presence of speakers), crossover
frequency, speaker distance, A/V Sync and much of the processing set via
Home menu are enabled. See "Advanced Setup" for more details
(➔ page 34).
This mode is for use with DTS 96/24 sources. This is high-resolution DTS
with a 96 kHz sampling rate and 24-bit resolution, providing superior
fidelity. Use it with DVDs that bear the DTS 96/24 logo.
This mode is for use with DTS-ES Discrete soundtracks, which use a
discrete surround back channel for true 6.1/7.1-channel playback. The seven
totally separate audio channels provide better spatial imaging and 360-
degree sound localization, perfect for sounds that pan across the surround
channels. Use it with DVDs that bear the DTS-ES logo, especially those with
a DTS-ES Discrete soundtrack.
This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-
encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that
bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.
This mode expands any 2-channel source for up to 7.1-channel playback. It
uses seven full-bandwidth channels of matrix decoding for matrix-encoded
material, providing a very natural and seamless surround sound experience
that fully envelops the listener.
• Neo:6 Cinema
Use this mode with any stereo movie (e.g., TV, DVD, VHS).
• Neo:6 Music
Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
VHS, DVD).
This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel
playback.
Input Speaker
Source Layout
*2
*2
*2
*2
*5
*5
*5