Replacing The Wiper And Wiper Cleaner - Epson SureColor S30670 User Manual

2. Insert the waste ink tube into the mouth of the new waste ink bottle and place the waste
ink bottle in the holder.
Tightly seal the lid on the used waste ink bottle.
Important:
❏ Be sure to confirm that the waste ink tube is inserted in the mouth of the waste ink bottle. Ink
will spill onto the surrounding area if the tube is not inserted in the bottle.
❏ You will need the lid for the waste ink bottle when disposing of waste ink. Keep the lid in a
safe place; do not throw it out.
3. Press the Z button.
4. Check again to confirm that a fresh waste ink bottle is correctly placed and then press
the Z button to reset the waste ink counter.

Replacing the Wiper and Wiper Cleaner

Replace the wiper and wiper cleaner as directed below:
❏ Once every six months
❏ When the front of the wiper cleaner (the absorbent parts) start to get stained with ink
1. Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
2. Use the d/u buttons to select Head Maintenance and press the Z button.
102
Maintenance