Cleaning The Printer; Cleaning Outside Of The Printer - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910
E
Set the number for #1C to #3VLM, and then
press the button.
Note:
❏ When printing a pattern on a cut sheet
media, you need to prepare several sheets.
When the first page is printed, load the
next paper.
❏ When printing a pattern on
non-transparent media, set the alignment
value of the white ink to 4.
User's Guide
Maintenance
82

Cleaning the Printer

To keep your printer in top operating condition, clean
it thoroughly if it becomes soiled.
Warning:
w
Take care to prevent water or other foreign
matter getting inside the printer. If moisture, dirt,
or other matter gets inside of the printer, besides
affecting print quality, it may cause the electric
circuits to short.

Cleaning outside of the printer

A
Remove the paper from the printer.
B
Make sure the printer is turned off and all the
lights are off, and then unplug the power cord
from the electrical outlet.
C
Use a soft, clean cloth to carefully remove any
dust or dirt.
If the dirt does not come off, clean it using a
soft, clean cloth dampened with a mild
detergent. Then, wipe the outside of the printer
with a dry, soft cloth.
Caution:
c
Never use alcohol or thinners to clean the
printer; these chemicals can damage the
components as well as the case.