When Handling The Ink Cartridges; When Transporting This Product; Illustrations Used In This Guide - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910
When handling the ink
cartridges
❏ Keep ink cartridges out of the reach of children
and do not drink.
❏ If ink gets on your skin, wash it off with soap and
water. If it gets in your eyes, flush them
immediately with water.
❏ Before installing the new ink cartridge in the
printer, shake it horizontally as shown in the
illustration. Shake it back and forth horizontally
in five centimeter movements about 100 times
within 30 seconds for white, and about 15 times
within five seconds for all other cartridges.
Caution:
c
Do not shake cartridges (that have been installed
previously) with too much force.
❏ Use the ink cartridge before the date printed on
its package.
❏ Use up the ink cartridge within six months of
installation for best results.
❏ Do not dismantle the ink cartridges or try to refill
them. This could damage the print head.
❏ Do not touch the green IC chip on the side of the
cartridge. This may affect normal operation and
printing.
❏ The IC chip on this ink cartridge retains a variety
of cartridge-related information, such as the ink
cartridge status, so that the cartridge may be
removed and reinserted freely. However, each
time the cartridge is inserted, some ink is
consumed because the printer automatically
performs a reliability check.
User's Guide
Safety Instructions
8
❏ If you remove an ink cartridge for later use,
protect the ink supply area from dirt and dust,
and store it in the same environment as this
product. Note that there is a valve in the ink
supply port, making covers or plugs unnecessary,
but care is needed to prevent the ink from
staining items that the cartridge touches. Do not
touch the ink supply port or surrounding area.

When transporting this product

❏ Before transporting the printer, make sure the
print heads are in the home (far right) position.

Illustrations used in this guide

❏ The illustrations in this guide are from a similar
printer model. Although they may differ to your
actual printer, the method of operation is the same.