The Control Panel; Buttons, Lights, And Messages; Buttons - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910

The Control Panel

Buttons, Lights, and
Messages
You can check the ink remaining and printer status on
the control panel.

Buttons

1. Power button ( )
Turns the printer on or off.
2. Pause/Reset button (
❏ The printer enters the PAUSE state when this
button is pressed in the READY state. To cancel the
pause, select PAUSE CANCEL on the LCD panel.
When selecting JOB CANCEL, it functions as the
Reset button. The printer stops printing and
clears print data in the printer. After clearing the
data, it may take a while to return to the READY state.
❏ The printer returns to the READY state when this
button is pressed in the Menu mode.
❏ Clears errors if it is possible.
See "Error Messages on the LCD Panel" on
page 88
3. Cleaning button (
Shortcut button to the CLEANING menu in
MAINTENANCE. If you notice that print quality has
declined, press this button and select the best cleaning
option to improve print quality.
See "Head cleaning" on page 77
4. Ink Cover Open button (
Slightly opens the ink cover, selecting right of left
indicated on the display.
User's Guide
The Control Panel
)
)
)
5. Paper Source button (
❏ Selects a paper source and roll paper cut method.
The icon changes by pressing this button.
However, you cannot change the paper source
icon to Sheet
REMAINING PAPER SETUP is set to ON.
Icon Explanation
Roll Auto Cut
On
Roll Auto Cut
Off
Sheet
❏ Returns to the previous level when pressed in the
Menu mode.
6. Paper Feed button (
❏ Feeds the roll paper in the forward
three meters or reverse
to feed the paper faster in the forward
direction, press and hold it for three seconds. You
can feed 20 cm of paper in the reverse
direction with one press.
❏ If you press these buttons while the paper presser
is released, you can adjust the paper suction in the
paper feed path in three stages.
See "Loading Cut Sheet A3 Size or Larger /
Thick paper" on page 40
❏ Press the
button when setting a single cut
sheet with a thickness of under 0.5 mm, the
printer starts feeding the paper and then goes to
READY status.
❏ Feeds the sheet in the forward direction when you
press the button.
❏ Changes the parameters in the forward
reverse order when selecting the parameter in
Menu mode.
7. Menu button (
❏ Enters the Menu mode when pressed in the
READY status.
See "Menu Mode" on page 17
13
)
when you load the paper while
Prints on roll paper.
Cuts the roll paper
automatically after
printing each page.
Prints on roll paper.
Does not cut the paper
automatically after
printing. You need to
manually cut the paper.
Prints on the sheet.
/ )
up to
direction. If you want
)
or