Paper Setup - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910

PAPER SETUP

When you use non-Epson media, be sure to make the appropriate settings for the paper.
Item
ROLL PAPER REMAINING
PAPER TYPE
CUSTOM PAPER
User's Guide
The Control Panel
Parameter
REMAINING PAPER SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
ClearProof Film
Premium Glossy 250
Premium Glossy Sheet
Proofing Paper W Sm
CUSTOM PAPER
NO PAPER SELECTED
Bundled Roll Paper
PAPER NO.1 - 10
Explanation
You can load the paper remaining counter function only if paper
is not loaded in the printer.
❏
OFF:
The ROLL PAPER REMAINING function is disabled. The Roll
Paper Counter icon does not appear on the LCD panel.
❏
ON:
The remaining amount of roll paper is displayed on the LCD
panel. When you press the
(including the PAPER TYPE, the ROLL PAPER LENGTH, and
the ROLL LENGTH ALERT value information) is printed on
the roll paper edge.
When the roll paper is changed, the barcode is scanned and the
PAPER TYPE, the ROLL PAPER LENGTH, and the ROLL LENGTH
ALERT value information are set.
These settings are available only when REMAINING PAPER
SETUP is ON.
You can receive a message when there is not much paper left by
setting the roll alert.
When using roll paper, enter the length of the roll paper set in
the printer and the alert value. You can set the ROLL PAPER
REMAINING from 5.0 to 99.5 m, and the ROLL LENGTH ALERT
from 1 to 15 m.
You can select the media type loaded in the printer.
Bundled Roll Paper means matte paper supplied with the
printer. Using Bundled Roll Paper for the initial setup of the
printer and optional SpectroProofer mounter.
You can select a number (between 1 to 10) to register the
settings (such as PAPER TYPE, PLATEN GAP, PAPER THICKNESS,
PAPER FEED ADJUST, DRYING TIME, PAPER SUCTION) or to
recall the settings you have made.
The number you select here is displayed on the LCD panel.
See "CUSTOM PAPER SETUP" on page 28
27
button, the barcode