Printing Separator Lines Between Cells; Pausing Between Labels; Advancing The Label; Adjusting The Print Contrast - Dymo Rhino 4200 Industrial Label Printer User Manual

Select one of the following:
5
• Yes to print collated.
• No to print normally.
Press to begin printing.
6

Printing Separator Lines between Cells

For multi-cell labels, such as breaker and module labels,
you can choose whether or not to print a separator line
between each of the cells. By default, separator lines are
printed between cells.
To turn off printing of separator lines
Press +
1
Select Print options and press
2
Select Separator lines and press
3
Select No and press
4

Pausing Between Labels

When printing multiple copies, the printer pauses after
printing each label so you can cut the label. You can turn
this feature off to have the labels print continuously.
To print continuously
Press +
1
Select Print options and press
2
Select Pause to cut and press
3
Select No and press
4

Advancing the Label

To add additional blank space to the beginning or
end of your label, you can advance the label in 1/4"
increments.
To advance the label
Press +
1
Press to advance the label.
2

Adjusting the Print Contrast

Depending on the label material you choose, you may
need to lighten or darken the printed text on the label.
To adjust the print contrast
Press +
1
Select Print options and press
2
Select Print contrast and press
3
Press or to increase or decrease the
4
print contrast.
Press .
5
Repeat as necessary until you are satisfied with the
6
print quality.
.
.
.
.
.
.
.
.
.
.
.
.

Cleaning Your Printer

Your printer is designed to give you long and trouble-free
service, while requiring very little maintenance.
Clean your printer from time to time to keep it
working properly.
To clean the cutter blade
Remove the label cassette.
1
Press and hold the cutter button to expose the
2
cutter blade.
Use a cotton ball and alcohol to clean both sides of
3
the blade.
The cutter blade is extremely sharp.Use caution
when cleaning.
To clean the print head
Remove the label cartridge.
1
Remove the cleaning tool from inside the label
2
cartridge door.
Gently wipe the padded side of the tool across the
3
print head. See Figure 7.
15
Figure 7