System Requirements; Printing Labels; Developer And Sdk Information - Dymo LabelWriter 450 Turbo User Manual

The form-feed button on the front of the printer advances a single label. The reverse label button is
used to remove labels from the printer when changing rolls. The LabelWriter SE450 printer does
not include a reverse label button.
The status light visually shows the current state of the printer. Refer to "Status Light" on page 11 for
a complete description of the status light.

System Requirements

The LabelWriter printer requires a USB 1.1 or USB 2.0 connection and one of the following:
•
•
•
•
To use the LabelWriter SE450 printer with a serial connection, an RS-232 serial port is required.

Printing Labels

DYMO desktop labeling software make designing and printing labels easy. Download DYMO
desktop labeling software from support.dymo.com.

Developer and SDK Information

DYMO provides various types of information designed to help developers create products that
work with the LabelWriter printers and DYMO Label software. Below are some notes for those
interested in developing products that work with LabelWriter printers.
•
•
Top cover
Label spool
Label release
Label feed path
and tear bar
Windows ® XP 32-bit
Windows Vista ®
®
Windows 7
®
Mac OS v10.4 or later
Keep in mind that LabelWriter printers use standard printer drivers. Therefore, printing to a
LabelWriter printer is no different than printing to a laser or inkjet printer, except that the pages
are smaller.
In cases where you want to automate printing and take advantage of the label printing power
built into DYMO Label software, a Software Developer's Kit (SDK) is included in your
Label roll
Serial
connector
USB
connector
Cable
channel
Form-feed button
and status light
LabelWriter SE450
System Requirements
USB 10101 24VDC
DC power
connector
Serial number
3