Warranty Registration Please complete the warranty registration card and return it to the appropriate customer service address within seven days. Visit www.dymo.com/ industrial for details. Getting Started Follow the instructions in this section to start printing your first label.
5. Close the label cassette door and press turn on the power. Settings You can select the language and corresponding units of measure you want the printer to use. Selecting a Language LANG The language setting determines the availability of special characters.
Formatting Your Label You can choose from several formatting options to enhance the appearance of your labels. The printer remembers the last feature selection made so that each time you enter one of the feature menus described in this section, you are positioned at the last item selected from that menu.
The first time you select Symbol or one of the Hot Keys, the first symbol available appears in the display. Otherwise, the last symbol used appears in the display. Adding Symbols The printer supports the extended symbol set as shown in Figure 7. ¡ £ ¢...
Printing Modes Two print modes are available in addition to Normal: fixed length and flag mode. Pressing returns you to normal printing mode. NORMAL Printing Fixed Length Labels Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text.
Your printer is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette. To clean the cutter blade 1.
Batteries almost discharged. Motor Stall Motor is stalled due to label jam. If you still need assistance, contact DYMO Customer Support for your country. The Warranty booklet includes a list of contact numbers for each country. Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Page 10
No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. RhinoPRO is a trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.