Viewing The Digital Signal Meter - Toshiba 32L2200U User Manual

58
Setting up your TV

Viewing the digital signal meter

3 Press the ( /
then press the ( /
mode (Auto, Digital, or Analog). (Auto is the recommended
mode.) See
HDMI® input" on page
(Sample Illustration) HDMI
Mode:
Auto
Digital
Analog
4 To save the setting, highlight Done, and then press the ENTER
button.
NOTE
Viewing the digital signal meter
You can view the digital signal meter in the ANT/CABLE digital
TV input source only.
arrow) buttons to select HDMI 1 Audio, and
"Connecting an HDMI® or DVI device to the
Description:
When viewing the HDMI 1 input, if digital audio from the HDMI
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
When viewing the HDMI 1 input, digital audio from the HDMI
input will be output.
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to "No," the HDMI 1 Audio
setting changes to "Auto." If PC Audio is set to "Yes," the HDMI 1
Audio setting is set to "Digital" and is grayed out in the menu. See
"Setting the PC Audio" on page
arrow) buttons to select the HDMI 1 audio
29.
®
Audio mode selection
101.
®
®