Viewing The System Status; Resetting Factory Defaults - Toshiba 32L2200U User Manual

60
Setting up your TV

Viewing the system status

Viewing the system status
1 Press the MENU button and open the Setup menu.
2 Highlight Installation, and then press the ENTER button.
A new set of Installation menu icons appears.
3 Open the System Status menu, highlight System
Information, and then press the ENTER button.
4 Press the ( /
to select Factory Defaults or Support Information.
The related information appears.
To close the screen and return to the Installation menu:
❖
Highlight Done in the Support Information screen, and then
press the ENTER button.
To return to normal viewing, press the EXIT button.

Resetting Factory Defaults

To reset all settings and channels to their factory default values:
1 Press the MENU button and open the Setup menu.
2 Highlight Installation, and then press the ENTER button.
A new set of Installation menu icons appears.
3 Open the System Status menu, highlight System
Information, and then press the ENTER button.
4 Press the ( /
to select Factory Defaults.
5 Highlight Yes, and then press the ENTER button.
6 If a PIN code has been set, enter your PIN code.
7 Press the ( /
the ENTER button.
A warning message appears.
8 Select Yes, and then press the ENTER button.
The TV turns off automatically after a few seconds.
9 After the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset process, select No, and press the ENTER button
in step 5
arrow) buttons to scroll through the menu bar
arrow) buttons to scroll through the menu bar
arrow) buttons to select Done, and then press
above.