Table of Contents
Advertisement
8
Basicfeatures
Viewmg the HDM1 _ signal infin'matio
Other HDIVll
TM
CECControlfunctions
When Enable HDMI CEC Control and all items in the HDMI
TM
CEC
Control Setup menu are set to On, the following functions will be
enabled:
Item:
TVAutoPower
AutoStandby
AmplifierControl
InitialSpeaker
Setting
Description:
If an _E_C"
device is turnedon,theTVturns on automatically.
If theTVis turnedoff,it will senda message t o turn off all ofthe
HDMI
T M
CECdevices connected t o theTV.
If Amplifier Control is setto On,youcanadjustthesoundvolumeor
turn off thesoundusingtheremote control.
With this item,you cansetyouraudiooutputpreference t o theTV
Speakers o r theAmplifier.Whenthis itemis setto Amplifier, t heremote
controlcanbeusedto adjustor mutethevolumeoftheaudio.This
itemwill notbeavailable andsetto TVSpeakers a utomatically unless
an HDMI
T M
CECcompatible audiosystemis connected.
NOTE
Whenyouturn on theaudiosystem, c hangeits inputsource,or adjustthe
soundvolume,thesoundwill beoutputfromtheaudiosystem's speakers
evenif TVSpeakers h asbeenselected. T urntheTVoff andon againto
outputthe soundfromtheTVspeakers.
Viewingthe HDMI
T M
signalinformation
1
Press the SETUP button.
2
Select Options > HDMI Information Display and press the OK
button.
3
Press the A/V (arrow) buttons to select On.
4
Press the INFO button.
HDMI
TM
Information is shown (Resolution, Scan Type, Frame
Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma
Format), and the nounal banner and signal infounation banner
appear.
NOTE
4
Thesignalinformation banner will appear whenthis feature is setto
Onandyouwatchan HDMI"inputandpresstheINFO button.The
signalinformation will disappear a fter60 seconds.
•".. If youpresstheINFObuttonwhenthis feature is setto Off,onlythe
normalbanner will appear.
Advertisement
Table of Contents
