Toshiba 32L2200U User Manual page 28

28
Connecting Your TV
Connecting a Blu-ray™/DVD Player/Satellite receiver with
❖
Component video cables
❖
❖
NOTE
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream
input source on the TV.*
To view satellite programs using the component video
connections:
Turn ON the satellite receiver. Select the ColorStream
input source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select
the ColorStream
DVD.
*To select the video input source, press the INPUT button on the
remote control. See
NOTE
You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has
®
HDMI video, see
to the HDMI® input" on page
When you use ColorStream
AV input mode.
®
HD video input source on the TV* to view the
"Selecting the video input source" on page
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
"Connecting an HDMI® or DVI device
29.
®
HD or Video, switch to the appropriate
®
HD video
®
HD video
61.