If the problem persists, use the Reset Factory Defaults procedure.
For instructions, see
Closed caption problems
If the program or video you have selected is not closed captioned,
no captions appear on the screen.
If text is not available, a black rectangle may appear. If this
happens, turn off the closed caption feature. For instructions, see
"Using closed captions" on page
A closed caption signal may not display correctly under the
following circumstances:
❖
The recording is dubbed
❖
The signal reception is weak
❖
The signal reception is non-standard
For additional information, see
Rating blocking (V-Chip) problems
Forgotten PIN code.
When the PIN code screen appears, press the INFO button 4 times
within approximately 5 seconds. The old PIN code is cleared. For
more information, see
The V-Chip feature is available for U.S. V-Chip systems only. For
more information, see
on page
®
No HDMI
CEC operation
The HDMI
compatible devices.
Ensure that HDMI
If the connected HDMI
you have changed settings of the device, turn off your TV and
unplug the power cord, and then plug it in and turn it on again.
If several devices are connected, the HDMI
operate properly.
Read the instruction manual furnished with the connected HDMI
CEC device.
"Resetting Factory Defaults" on page
"Forgotten PIN code" on page
"Using parental controls (for USA region)"
91.
®
CEC feature is available for Toshiba HDMI
®
cables with the (
®
Troubleshooting
Closed caption problems
81.
"Using closed captions" on page
CEC device does not work correctly after
60.
90.
®
CEC-
) logo are used.
®
CEC feature may not
125
81.
®