Picture Problems - Toshiba 32L2200U User Manual

122
Troubleshooting

Picture problems

Other problems.
If your TV's problem is not addressed in this Troubleshooting section or
the recommended solution has not worked, then use the Reset Factory
Defaults procedure. For instructions, see
page 60.
TV will not turn on.
Ensure the power cord is plugged in properly, and then press the
POWER button.
Replace the batteries in the remote control. For instructions, see
"Installing batteries" on page
Try the control panel buttons on the TV.
Picture problems
General picture problems.
Check the antenna/cable connections. For instructions, see
"Connecting Your TV" on page
Press the INPUT button on the remote control or on the TV, and
then select a valid video input source (see
input source" on page
the TV, no picture appears when you select that particular input
source. For device connection details, see
on page
Antenna reception may be poor. Use a highly directional outdoor
antenna (if applicable).
The station may be having broadcast difficulties. Try another
channel.
Adjust the picture quality. For instructions, see
picture settings" on page
Cannot view external signals or channel 3 or 4.
If you cannot view signals from external devices connected to
VIDEO, ColorStream
channel 3 or 4, ensure that the Input Lock is set to Off. For
instructions, see
Noisy picture.
If you are watching an analog channel (off-air broadcast or Cable
TV), you can set the CableClear
interference in the TV picture. For instructions, see
digital Noise Reduction" on page
61). If no device is connected to an input on
22.
®
HD, HDMI 1, HDMI 2, PC, or from
"Using the Locks menu" on page
"Resetting Factory Defaults" on
41.
22.
116.
®
feature to reduce visible
118.
"Selecting the video
"Connecting Your TV"
"Using the advanced
89.
"CableClear®