Other Hdmi ™ Cec Control Functions; Viewing The Hdmi ™ Signal Information - Toshiba 39L4300UM User Manual

84
Basic features
Viewing the HDMI
™
Other HDMI CEC Control functions
When Enable HDMI CEC Control and all items in the HDMI
Control Setup menu are set to On, the following functions will be
enabled:
Item:
TV Auto Power
Auto Standby
Amplifier Control
Initial Speaker
Setting
NOTE
Viewing the HDMI
1 Press the SETUP button.
2 Select Options > HDMI Information Display and press the OK
button.
3 Press the p / q (arrow) buttons to select On.
4 Press the INFO button.
HDMI
Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma
Format), and the normal banner and signal information banner
appear.
NOTE
Description:
™
If an HDMI CEC device is turned on, the TV turns on automatically.
If the TV is turned off, it will send a message to turn off all of the
™
HDMI CEC devices connected to the TV.
If Amplifier Control is set to On, you can adjust the sound volume
or turn off the sound using the remote control.
With this item, you can set your audio output preference to the TV
Speakers or the Amplifier. When this item is set to Amplifier, the remote
control can be used to adjust or mute the volume of the audio. This
item will not be available and set to TV Speakers automatically unless
™
an HDMI CEC compatible audio system is connected.
When you turn on the audio system, change its input source, or adjust the
sound volume, the sound will be output from the audio system's speakers
even if TV Speakers has been selected. Turn the TV off and on again to
output the sound from the TV speakers.
™
signal information
™
Information is shown (Resolution, Scan Type, Frame
The signal information banner will appear when this feature is set to
❖
On and you watch an HDMI
signal information will disappear after 60 seconds.
If you press the INFO button when this feature is set to Off, only the
❖
normal banner will appear.
™
signal information
™
input and press the INFO button. The
™
CEC