102
Basic features
Viewing the HDMI® signal information
NOTE
Select the appropriate HDMI
HDMI 3, or HDMI 4):
1
Press the MENU button. Select SETTINGS,
PREFERENCES, AV Connection, and then press the OK
button.
Press the ( /
2
and then press the OK button.
Press the ( /
3
Viewing the HDMI
1
Press the MENU button. Select SETTINGS,
PREFERENCES, HDMI Information Display.
Press the ( /
2
button.
The normal banner and signal information banner appear.
NOTE
Using your computer with the TV
Adjusting the image
If the edges of the picture are hidden, readjust Horizontal Position
and Vertical Position. If the picture is affected by interference,
readjust Clock Phase and Sampling Clock.
1
Select PC input mode, see
on page
2
Press the MENU button. Select SETTINGS,
PREFERENCES, Display Settings, and then press the OK
button.
®
If your HDMI
connection is capable of 1080p and/or your TV is
capable of refresh rates greater than 60 Hz, you will need a High
®
Speed HDMI
cable. Conventional HDMI
properly with this mode.
arrow) buttons to select HDMI RGB Range,
arrow) buttons to select a setting.
®
signal information
arrow) buttons to select On. Press the INFO
❖
The signal information banner will appear when this feature is
set to On and you watch an HDMI
❖
If you press the INFO button when this feature is set to Off, only
the normal banner will appear.
86.
®
/ DVI cables may not work
®
input mode (HDMI 1, HDMI 2,
®
input.
"Selecting the video input to view"