Connecting A Digital Audio System - Toshiba 32L2200U User Manual

NOTE
Before controlling the device(s):
❖
After completing the above connections, configure the HDMI
CEC Setup menu with the desired settings, see
input source selection" on page
❖
The connected devices must also be configured. For details, see
the operation manual for each device.
❖
This feature uses the CEC technology as regulated by the
HDMI
❖
This feature is limited to models incorporating Toshiba's
HDMI
operations. Refer to the individual instruction manuals for
compatibility information.
NOTE

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT terminal outputs a Dolby
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
external audio system with optical audio input.
You will need an optical audio cable. Make sure to use an optical
audio cable that has the larger "TosLink" connector and not the
smaller "mini-optical" connector.
Connecting a digital audio system
❖
If several devices are connected, the HDMI
may not operate properly.
❖
For proper operation, it is recommended that you use an HDMI
cable with the HDMI
®
standard.
®
CEC. However, Toshiba is not liable for those
This feature may not work properly depending on the devices that are
connected.
Connecting Your TV
®
Logo ( ).
113.
®
Digital decoder or other
33
®
CEC Control feature
"HDMI® CEC
®
®
®