Table of Contents
Advertisement
84
Basic features
Viewing the HDMI
®
Other HDMI
CEC Control functions
When Enable HDMI CEC Control and all items in the HDMI
Control Setup menu are set to On, the following functions will be
enabled:
Item:
TV Auto Power
Auto Standby
Amplifier Control
Initial Speaker
Setting
NOTE
Viewing the HDMI
1
Press the MENU button.
2
Select Options > HDMI Information Display and press the OK
button.
3
Press the p / q (arrow) buttons to select On.
4
Press the INFO button.
HDMI
Aspect, Bit Depth, Color Space, RGB/YUV, Chroma Format), and
the normal banner and signal information banner appear.
NOTE
Description:
®
If an HDMI
CEC device is turned on, the TV turns on automatically.
If the TV is turned off, it will send a message to turn off all of the
®
HDMI
CEC devices connected to the TV.
If Amplifier Control is set to On, you can adjust the sound volume or
turn off the sound using the remote control.
With this item, you can set your audio output preference to the TV
Speakers or the Amplifier. When this item is set to Amplifier, the
remote control can be used to adjust or mute the volume of the audio.
The remote control will only control the amplifier, if an HDMI
compatible audio system is connected.
When you turn on the audio system, change its input source, or adjust the
sound volume, the sound will be output from the audio system's speakers
even if TV Speakers has been selected. Turn the TV off and on again to
output the sound from the TV speakers.
®
signal information
®
Information is shown (Resolution, Scan Type, Frame Rate,
The signal information banner will appear when this feature is set to
❖
On and you watch an HDMI
signal information will disappear after 60 seconds.
If you press the INFO button when this feature is set to Off, only the
❖
normal banner will appear.
®
signal information
®
input and press the INFO button. The
®
CEC
®
CEC
Advertisement
Table of Contents
