5 Connect the media card reader cable to the USB1 connector on the system board (see "System Board
Components" on page 28 for the connector location).
2
1
1
media card reader
4
media card reader cable
6 Install the drive panel to the front of the computer. The drive panel only fits one way (see "Drive-Panel
Inserts" on page 70).
7 Replace the computer cover (see "Replacing the Computer Cover" on page 297).
8 Enter system setup and use the Diskette Drive option to enable your new media card reader (see
"Entering System Setup" on page 257).
9 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 327).
Optical Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
78
Mini Tower Computer
3
2
shoulder screws (4)
.
4
3
shoulder screw slots (2)