Dell bpcwcsn_5 - OptiPlex - 740 User Manual page 50

1 card retention latch
4
card-edge connector
3 If necessary, disconnect any cables connected to the card.
4 Grasp the card by its top corners, and ease it out of its connector.
5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
NOTE:
Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the
computer. The brackets also keep dust and dirt out of your computer.
6 Before you close the card retention mechanism, ensure that:
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the alignment guide.
7 Secure the card(s) by closing the card retention latch and snapping it into place.
8 Replace the computer cover (see "Replacing the Computer Cover" on page 297).
50
Mini Tower Computer
2
1
6
2 alignment guide
5
card connector
3
4
5
3 card
6
release tab