Dell bpcwcsn_5 - OptiPlex - 740 User Manual page 142

1
riser-card cage
4 system board connectors (2)
13 Reconnect any cables that you removed in step 3.
NOTICE:
Do not route card cables over the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
14 Connect any cables that should be attached to the card.
15 Replace the computer cover (see "Replacing the Computer Cover" on page 297).
16 If you installed a sound card:
Enter system setup, select Integrated Audio from the Onboard Devices group, and change
a
the setting to Off (see "System Setup" on page 257).
Connect external audio devices to the sound card's connectors. Do not connect external
b
audio devices to the line-in connector on the back panel of the computer (see "Back-Panel
Connectors" on page 99).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
2
slots
1
3
4
3
riser cards (2)
Desktop Computer
2
142