Dell bpcwcsn_5 - OptiPlex - 740 User Manual page 43

1
1
fully seated card
4 bracket caught outside of slot
7 Secure the card(s) by closing the card retention latch and snapping it into place.
NOTICE:
Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover
from closing properly or cause damage to the equipment.
8 Connect any cables that should be attached to the card.
9 Replace the computer cover (see "Replacing the Computer Cover" on page 297).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
NOTE:
See the documentation for the card for information about the card's cable connections.
10 If you installed a sound card:
Enter system setup, select Integrated Audio from the Onboard Devices group, and change the
a
setting to Off (see "System Setup" on page 257).
Connect external audio devices to the sound card's connectors. Do not connect external audio
b
devices to the line-in connector on the back panel of the computer (see "Back-Panel Connectors"
on page 25).
11 If you installed a network adapter card and want to turn off the integrated network adapter:
Enter system setup, select Integrated NIC from the Onboard Devices group, and change the
a
setting to Off (see "System Setup" on page 257).
2
2
not fully seated card
3
4
3
bracket within slot
Mini Tower Computer
43