Settings Backup and Firmware Upgrade
Once you have installed the VPN firewall and have it working properly, you should back up a copy
of your settings, in case something gets corrupted. When you backup the settings, these are saved
as a file on your computer. You can then restore the VPN firewall settings from this file. The
Settings Backup and Firmware Upgrade screen allows you to:
•
Back up and save a copy of your current settings
•
Restore saved settings from the backed-up file.
•
Revert to the factory default settings.
•
Upgrade the VPN firewall firmware from a saved file on your hard disk to use a different
firmware version.
Backup and Restore Settings
To backup settings:
1. Select Administration > Settings Backup and Firmware Upgrade from the main/submenu.
The Settings Backup and Firmware Upgrade screen displays.
Figure 9-5
2. Click Backup to save a copy of your current settings.
•
If your browser isn't set up to save downloaded files automatically, locate where you want
to save the file, specify file name, and click Save.
Firewall and Network Management
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
v1.0, October 2008
9-13