ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
To restrict logging in based on IP address:
1. Select the by Source IP Address tab and the by Source IP Address screen displays.
Figure 8-7
2. In the Defined Addresses Status section, select:
•
the Deny Login from Defined Addresses to deny logging in from the IP addresses that
you will specify
•
the Allow Login only from Defined Addresses to allow logging in from the IP addresses
that you will specify.
3. Click Apply.
4. To specify a single IP address, select IP Address from the Source Address Type pull-down
menu and enter the IP address in the Network Address/IP address field.
5. To specify a subnet of IP addresses, select IP Network from the Source Address Type pull-
down menu. Enter the network address and netmask length in the Network Address/IP
address field.
6. Click Add to move the defined address to the Defined Addresses table.
7. Repeat these steps to add additional addresses or subnets.
8-6
Managing Users, Authentication, and Certificates
v1.0, October 2008