NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual page 23

Table 1-1. Description of Front Panel Items
Item Activity
PWR On Green
(Power) Off
TEST On Amber
Blinking Amber
1
Off
Off
n/a 5 GHz
Blink (Green)
n/g 2.4 GHz Off
Blink (Green)
Reboot
Reset
button
Factory
(Press with
2
Defaults
a sharp
object)
3 LAN Ports LAN connections
4 WAN Port WAN connection
Introduction
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Description
Power is supplied to the firewall.
Power is not supplied to the firewall.
Test mode: The system is initializing (On) or the initialization has
failed (Blinking).
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
WLAN 802.11n/a (5GHz) mode is disabled.
Wireless data traffic in 5GHz modes.
WLAN 802.11b/g/n (2.4 GHz) mode is disabled.
Wireless data traffic in 2.4 GHz modes
Press once to reboot the unit.
Hold in for 15 seconds (until the TEST light flashes). This
resets the unit to factory default settings, erasing all
configuration settings and restores the default password.
Four Auto MDI/MDIX, Gigabit Ethernet ports.
Left LED (status): On = Link; Blink = ACT
Right LED (speed): Off = 10M; Amber = 100M; Green = 1000M
One Auto MDI/MDIX, Gigabit Ethernet port.
v1.0, October 2008
1-7