Configuring Static Routes - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Configuring
S
Static Routes provide additional routing information to your firewall. Under normal
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You should configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.
To add or edit a static route:
1. Select Network Configuration > Routing from the main/sub-menu.
The Routing screen displays.
Figure 3-5
2. Click Add and the Add Static Route tab is displayed.
Figure 3-6
3-10
tatic Routes
v1.0, October 2008
LAN Configuration