Monitoring The Wan Port Status - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Item
LAN Port
WAN Configuration
Wireless Configuration

Monitoring the WAN Port Status

You can monitor the status of the WAN connection, the Dynamic DNS Server connection, and the
DHCP Server connection. To monitor the status of the WAN port:
1. Select Network Configuration and WAN Settings to display the WAN ISP Settings screen.
2. Click the WAN Status to display the Connection Status popup window.
11-8
Description
Displays the current settings for MAC address, IP address, DHCP role and IP
Subnet Mask that you set in the LAN IP Setup page. DHCP can be either Server
or None.
Indicates whether the WAN State is UP or DOWN. It also is displayed if:
• NAT is Enabled or Disabled.
• Connection Type: DHCP enabled or disabled.
• Connection State
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.
• Wireless Status
• SSID
• Mode
• Security Settings
• Region
• Channel
• AP MAC Address
v1.0, October 2008
Monitoring System Performance