Wireless Security Types And Settings - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual

Wireless Security Types and Settings

Configure the Wireless Security Types based on the level of security you need using one of the
following methods and print out the form provided to aid you in making your selections:
• Print out the "SSID and WEP/WPA Settings Setup Form" on page 4-9
• To configure WEP encryption for Open Systems or Shared Key, see
on page 4-11.
• To configure WPA-PSK, see
• To configure WPA2-PSK, see
• To configure WPA-PSK and WPA2-PSK, see
on page 4-13.
• To configure WPA with RADIUS, see
• To configure WPA2 with RADIUS, see
page 4-14.
• To configure WPA and WPA2 with RADIUS, see
RADIUS" on page 4-15
Use the Wireless Security Type section in the Wireless Settings menu to select the desired security
method, but the balance of the security settings are set in the following main menus:
• Go to "Firewall Security and Content Filtering" in Chapter 5
• Go to "Virtual Private Networking Using IPsec" in Chapter 6
settings
• Go to "Virtual Private Networking Using SSL" in Chapter 7
• Go to "Managing Users, Authentication, and Certificates" in Chapter 8
• Go to "Firewall and Network Management" in Chapter 9
4-8
"Configuring WPA-PSK" on page
"Configuring WPA2-PSK" on page
"Configuring WPA-PSK and WPA2-PSK"
"Configuring WPA with RADIUS" on page
"Configuring WPA2 with RADIUS" on
"Configuring WPA and WPA2 with
v1.0, October 2008
"Configuring WEP"
4-12.
4-12.
for the Security menu settings
for the VPN IPsec tunnel
for the VPN SSL tunnel settings
for the Users menu
for the Administration menu
Wireless Configuration
4-13.