To qualify for product updates and product warranty registrations, we encourage you to register on
the NETGEAR Web page at: http://www.NETGEAR.com.
Hardware Description
The ME103 802.11b ProSafe Wireless Access Point front and rear hardware functions are
described below.
ME103 Wireless Access Point Front Panel
The ME103 Access Point provides these status LEDs.
ProSafe Wireless Access Point
802.11b
PWR
Figure 1-1: ME103 front panel
The following table explains the LED indicators:
LED
Power
Blink
Introduction
User's Guide for the ME103 802.11b ProSafe Wireless Access Point
LAN
Wireless LAN
DESCRIPTION
Power Indicator
Off
No power. If this LED does not come on with the power adapter and cord
correctly installed, see Chapter 4, Troubleshooting.
On
Power is on.
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going on steady.
ME103
MODEL
1-5