NETGEAR ME103 - 802.11b ProSafe Wireless Access Point User Manual page 41

Note: If you change the LAN IP address of the wireless access point while connected
through the browser, you will be disconnected. You may need to restart your computer
for the new IP address setting to take effect.
• Access Point Name (NetBIOS)
Enter a new name for the wireless access point and click Apply save your changes.
• Enable EWINS
This allows your wirelessly connected PCs to browse that remote network using the Windows
Network Neighborhood feature. Click this check box, enter the WINS Server name or IP
address and click Apply to save your changes.
Basic Installation and Configuration
User's Guide for the ME103 802.11b ProSafe Wireless Access Point
2-20