NETGEAR ME103 - 802.11b ProSafe Wireless Access Point User Manual page 55

1. Configure the RADIUS server to use the 802.1x settings in the worksheet above.
Add the ME103 to the RADIUS server with either its IP address or the NetBIOS name.
a.
Configure the shared key so that the RADIUS server allows the ME103 to log in.
b.
2. Configure the ME103 802.1x EAP-MD5 parameters.
Log in to the ME103 using the NetBIOS name printed on the bottom of the unit or at its
a.
default address of
default user name of
in the Advanced section of the main menu to display the menu shown below.
Figure 4-1: Advanced Security Settings EAP-MD5 Menu
Advanced Configuration
User's Guide for the ME103 802.11b ProSafe Wireless Access Point
http://192.168.0.224
and password of
admin
or at the current IP address of the unit. Use the
. Click the Security Settings link
password
4-3