User's Guide for the ME103 802.11b ProSafe Wireless Access Point
•
WG511 802.11g Wireless CardBus Adapter
•
MA111 801.11b Wireless Bridge
•
MA101 802.11b Wireless USB Adapter
•
ME102 802.11b Wireless Access Point
•
MA311 802.11b Wireless PCI Adapter
•
MA701 802.11b Wireless Compact Flash Card
System Requirements
Before installing the ME103, make sure your system meets these requirements:
•
A 10/100 Mbps Local Area Network device such as a hub or switch.
•
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in this
package or one like it.
•
A 100-240 V, 50-60 HZ AC power source.
•
A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or
Netscape Navigator 4.78 or later version.
•
At least one computer with the TCP/IP protocol installed.
•
802.11b-compliant devices, such as the NETGEAR MA401 Wireless Adapter.
What's In the Box?
The product package should contain the following items:
•
ME103 802.11b ProSafe Wireless Access Point.
•
Power adapter and cord (12Vdc, 800mA).
•
Straight through Category 5 Ethernet cable.
•
GearBox CD for ProSafe Wireless Access Point.
•
ME103 802.11b ProSafe Wireless Access Point Quick Installation Guide.
•
Support Information Card.
•
Warranty and Registration card.
Please contact your reseller or customer support in your area if there are any wrong, missing, or
damaged parts. You can refer to the Support Information Card for the telephone number of
customer support in your area. You should keep the Support Information card, along with the
original packing materials, and use the packing materials to repack the ME103 if you need to
return it for repair.
1-4
Introduction