Header Rec Menu Screen - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 94 Tuesday, October 24, 2006 3:11 PM
MENU SCREENS
HEADER REC Menu
Screen
The HEADER REC menu screen is used for settings related to the HEADER REC function. X See page 60.
Item
START KEY Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
the STOP button is pressed.
DISABLE
STOP+REC
TC DATA Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
REC.
EXECUTE
ZERO PRESET
CANCEL
The frame mode is set depending on the setting in the DROP FRAME item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val-
ue set for this item.
UB DATA Sets the user's bits of the HEADER REC section.
EXECUTE
ZERO PRESET
CANCEL
MEMO
• The user's bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
• When the "UB REC" item is set to "OFF", "--------" is displayed and this cannot be selected.
BARS TIME Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-
sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
BLACK TIME Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
PAGE BACK The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.
94
Function/Setting (bold characters indicate initial settings)
: HEADER REC operation is not executed.
: HEADER REC operation is executed.
: Confirms the set time code.
: Resets all time codes to "0".
: Clears the set time code.
: Confirms the set user's bits.
: Resets all user's bits data to "0".
: Clears the set user's bits.