Outputting Audio - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 63 Tuesday, October 24, 2006 3:11 PM

Outputting Audio

Setting
Confirm that the GY-HD250/GY-HD251 is in the VTR mode.
(VTR indicator: On)
MONITOR VTR indicator
SELECT switch
VF BRIGHT
USER 1 USER 2 USER 3
SHUTTER
ND FILTER
2
dial
1
MENU
STATUS
WHT.BAL
STATUS AUTO AUTO
AUDIO
CH-1 LEVEL CH-2
button
ON OFF
POWER REC
AUDIO menu screen
Earphone terminal output audio
Audio output is as shown in the table below depending on
the MONITOR SELECT switch and AUDIO MONITOR
and PB AUDIO CH [DV] settings on the AUDIO menu
screen.
MONITOR
SELECT
AUDIO MONITOR
CH-1
BOTH
CH-2
LCD BRIGHT
CAM/VTR
- +
AUDIO SELECT TC
CH-1 CH-2 DISPLAY GENE.
TC FREE
AUTO
MANU UB REC
REGEN
CAM/VTR button
PB AUDIO CH [DV]
CH1/2
- L/R: CH1
MIX L/R: CH1+CH2
STEREO L: CH1 R:CH2
- L/R: CH2
* In HDV format, you can only select the settings within the bold frame.
1.
Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2.
Set the AUDIO menu screen.
• PB AUDIO CH [DV] Items
CH1/2 : To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX : To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
CH3/4 : To reproduce the sound after-recorded
on CH-3 and CH-4.
AUDIO OUT connector
PB AUDIO CH [DV]
CH-1
CH1/2 CH1
MIX CH1+CH3
CH3/4 CH3
For HDV format, audio is output to CH1 and CH2 no matter
the settings.
3.
Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
• The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is
employed. The GY-HD250/GY-HD251 records audio on
the two channels CH-1 and CH-2. (4-channel recording
is possible in the case of DV input.)
When the GY-HD250/GY-HD251 is used for playback of
a tape that was recorded on another unit with audio
recorded on the CH-3 and CH-4 channels, the PB
AUDIO CH [DV] item on the AUDIO menu screen must
be set.
After-recording on the CH-3 and CH-4 channels is not
possible.
• The PB AUDIO CH [DV] item is also valid for embedded
audio.
• The sampling frequency for embedded audio is 48 kHz.
MIX
L/R: CH1+CH3
L/R: CH1+CH2+CH3+CH4
L: CH1+CH3 R: CH2+CH4
L/R: CH2+CH4
CH-2
CH2
CH2+CH4
CH4
CH3/4
L/R: CH3
L/R: CH3+CH4
L: CH3 R: CH4
L/R: CH4
63