Setting Menu Screens - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 75 Tuesday, October 24, 2006 3:11 PM

Setting Menu Screens

Make the settings while observing the LCD monitor or the
viewfinder screen.
If the ANALOG OUT CHAR. item or SDI OUT CHAR item on
the OTHERS[1/2] screen is set to ON, the menu screen can
also be viewed on a monitor connected to the video signal
output connector.
1.
Set the POWER switch to ON.
2.
Set the mode of the GY-HD250/GY-HD251 with the CAM/
VTR button. (Camera mode or VTR mode)
3.
Press the STATUS button for 1 second or longer.
• The TOP MENU screen appears.
USER1 USER2 USER3 button
SHUTTER dial
USER 1
ND FILTER
2
1
STATUS button
Cursor Menu screen
TOP MENU screen
USER 2 USER 3
SHUTTER
MENU
STATUS
4.
Select the menu screen to be set.
Rotate the SHUTTER dial to align the cursor (K) with the
menu screen to be set, and then press the SHUTTER
dial.
• The selected menu screen appears.
Item
VIDEO FORMAT[1/2] menu screen
5.
Select the menu item on the menu screen.
Rotate the SHUTTER dial to align the cursor (K) with the
item to be set, and then press the SHUTTER dial.
• The setting area of the selected item starts blinking,
and the setting can now be made.
6.
Change the setting.
Rotate the SHUTTER dial to change the setting, and then
press the SHUTTER dial.
• The setting area stops blinking and the setting is
entered.
To change multiple items, repeat the procedures in steps
5. and 6. above.
7.
Return to the TOP MENU screen.
Rotate the SHUTTER dial to align the cursor (K) with the
PAGE BACK item, and then press the SHUTTER dial.
To change settings on other menu screens, repeat the
procedures in steps 4. to 7. above.
To save the set contents in FILE, select the FILE MAN-
AGE menu screen and perform the operations for saving
to file.
X See "FILE MANAGE Menu Screen" on page 100.
8.
To return to the normal screen after completing the set-
tings, use either of the following methods.
Press the STATUS button
or
Return to the TOP MENU screen and align the cursor (K)
with the EXIT item, and then press the SHUTTER dial.
MEMO
• While the menu screen is being displayed, the USER1,
USER2 and USER3 buttons can also perform menu
operations.
USER1 button : Raises the cursor (K)/Changes the set-
ting
USER2 button : Lowers the cursor (K)/Changes the set-
ting
USER3 button : Confirms the menu item/Confirms the
setting
• The menu screen is not displayed when switching
between Camera and VTR mode (VTR indicator
flashes).
Setting
75