Switch Mode Menu Screen; See - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 86 Tuesday, October 24, 2006 3:11 PM
MENU SCREENS
SWITCH MODE Menu
Screen
The SWITCH MODE menu screen is only displayed in camera mode.
Item
SHUTTER Sets the fixed value (STEP) for values that can change using the SHUTTER dial on the right panel or the VARIABLE
used when shooting computer monitors.
STEP
VARIABLE
You can set the following using the REC item on the VIDEO FORMAT menu screen. (This is fixed at EEI when in
FULL AUTO mode.)
DV-60I
HDV-HD60P
HDV-HD30P
DV-50I
HDV-HD50P
HDV-HD25P
DV-25P
DV-24P
DV-24PA
HDV-HD24P
FAW Sets the positions to assign the FAW (Full Auto White Balance) function to the [WHT.BAL] white balance selector
switch c on page 15. (Fixed at FAW when in FULL AUTO mode)
NONE
A
B
PRESET
GAIN L Sets the gain value for each position on the [GAIN] sensitivity selector switch b on page 15.
GAIN M [Setting: 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, ALC] (Fixed at ALC in FULL AUTO mode)
GAIN H Initial values: L: 0dB, M: 9dB, H: 18dB
USER1 You can assign one of the following menu functions to the [USER1/2/3] buttons 8 on page 14 to each button.
USER2 Set according to the shooting conditions. This is only valid in CAMERA mode.This does not function in VTR mode.
USER3
NONE
BARS
PRESET TEMP.
B.STRETCH1
B.STRETCH2
B.STRETCH3
B.STRETCH4
B.STRETCH5
B.COMPRESS1
B.COMPRESS2
B.COMPRESS3
B.COMPRESS4
B.COMPRESS5
AE LEVEL+
AE LEVEL–
RET
LOAD FILE
LENS RET Sets the lens RET button functions. (This does not function if there is not RET button on the lens you are using.)
RET
FOCUS ASSIST
PAGE BACK When the cursor is in this position, press the SHUTTER dial to return to the TOP MENU screen.
86
Function/Setting (bold characters indicate initial settings)
: Switches the shutter speed using fixed values.
: Set when shooting a computer monitor, etc.
REC Item
1/7.5, 1/15, 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000
1/6.25, 1/12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
Initial value: 1/25
1/6, 1/12, 1/24, 1/48, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
Initial value: 1/48
: The FAW function is not assigned.
: Assigns FAW to the A position.
: Assigns FAW to the B position.
: Assigns FAW to the PRESET position.
Setting
Does not function.
Assigns "BARS" item functions in the CAMERA OPERATION menu screen.
Assigns "PRESET TEMP." item functions in the CAMERA OPERATION menu screen.
X See "CAMERA OPERATION Menu Screen" on page 80.
Assigns "BLACK" item functions in the CAMERA PROCESS[1/2] menu screen.
X See "CAMERA PROCESS[1/2] Menu Screen" on page 81.
Assigns "AE LEVEL" item functions in the CAMERA OPERATION menu screen.
MEMO
Cannot assign to the USER3 button. If you assign these menu functions, assign AE
LEVEL+ to the USER1 button, AE LEVEL– to the USER2 button.
Assigns the normal RET button function.
Assigns the function to jump to in the LOAD FILE menu.
X See "FILE MANAGE Menu Screen" on page 100.
: Functions as a normal RET button.
: Functions as the FOCUS ASSIST button.
Setting for STEP
Description
Setting for VARIABLE
1/30.03 - 1/10489.5
1/25.04 - 1/10489.5
1/24.01 - 1/10489.5