Back Color; Startup Logo; Managing The Sub Memory List - Panasonic PT-DW530U Operating Instructions Manual

BACK COLOR

This sets the color for the projection screen when no
signals are being input.
1 ) Press ▲▼ to select [BACK COLOR].
2 ) Press ◄► to switch [BACK COLOR].
The setting will change as follows each time
z
◄► is pressed.
BLUE
LOGO2
The entire projection area will
BLUE
appear blue.
The entire projection area will
BLACK
appear black.
The picture registered by the user
LOGO1 will be projected in the projection
area.
LOGO2 The Panasonic logo is projected.
Note
Separate software is required in order to create the
z
pictures to use for [LOGO1].

STARTUP LOGO

This sets the startup logo that is projected when the
power is turned on.
1 ) Press ▲▼ to select [STARTUP LOGO].
2 ) Press ◄► to switch [STARTUP LOGO].
The setting will change as follows each time
z
◄► is pressed.
LOGO2 NONE
LOGO2 The Panasonic logo is projected.
NONE No startup logo is projected.
The picture registered by the user
LOGO1
will be projected.
Note
Separate software is required in order to create the
z
pictures to use for [LOGO1]. Consult your dealer.
STARTUP LOGO will be displayed for 15 seconds.
z

Managing the sub memory list

You can restore the sub memory data when using
signals from the same input source. Sub memory data
contains the setting information of screen and image
adjustments, such as BRIGHTNESS, CONTRAST or
ASPECT.
Registering the current settings
J
to the list
1 ) In the normal screen (when the menu
is not displayed), press ◄► button.
z
z
2 ) Press ▲▼◄► to select the required
BLACK
sub memory data.
3 ) Press <ENTER> button.
LOGO1
z
4 ) Press <ENTER> button.
Note
For renaming a registered data, follow the same
z
procedure (steps 4 - 5) of "Renaming a registered data"
( Æ
Displaying the sub memory list
J
and restoring the settings
1 ) In the normal screen (when the menu
is not displayed), press ◄► button.
z
2 ) Press ▲▼◄► to select the required
sub memory data, and press <ENTER>
button.
z
3 ) Press <ENTER> button.
z
Deleting a sub memory data
J
LOGO1
1 ) In the normal screen (when the menu
is not displayed), press ◄► button.
z
2 ) Press ▲▼◄► to select the required
sub memory data, and press <ENTER>
button.
z
3 ) Press <DEFAULT> button.
z
z
DISPLAY OPTION menu
The signal must be registered before creating a
sub memory data of the signal.
Displays the list of corresponding sub memory
data to the signal.
The [ SIGNAL NAME] screen will be displayed.
page 71).
The [SUB MEMORY LIST] screen will be
displayed.
The [REGISTERED SIGNAL STATUS] screen
will be displayed.
Restores the settings in the data.
The [SUB MEMORY LIST] screen will be
displayed.
The [REGISTERED SIGNAL STATUS] screen
will be displayed.
Displays the [SUB MEMORY LIST] with
change.
You can return to the previous step by pressing
<MENU> button.
59
ENGLISH -