Technical Information; Serial Terminal - Panasonic PT-DW530U Operating Instructions Manual

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
Connection
J
Pin assignments and signal names
J
D-Sub 9-pin (female)
Outside view
Communication conditions (Factory setting)
J
Signal level
Sync. method
Baud rate
Parity
82
- ENGLISH
Connecting terminals
on projector
D-Sub 9-pin (female)
D-Sub 9-pin (male)
Pin No.
RS-232C-compliant
Asynchronous
9 600 bps
None
Computer
Communication cable
Signal name
— NC
TXD Transmitted data
RXD Received data
— Connected internally
GND Earth
— NC
CTS
Connected internally
RTS
— NC
Character length
Stop bit
X parameter
S parameter
Contents
8 bits
1 bit
None
None