Picture Menu; Picture Mode; Contrast - Panasonic PT-DW530U Operating Instructions Manual

PICTURE menu

See "Navigating through the menu"
z
Æ
( page 39).
See "MAIN MENU" and "SUB MENU"
z
( Æ page 40).

PICTURE MODE

The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
1 ) Press ▲▼ to select [PICTURE MODE].
2 ) Press ◄► to switch [PICTURE MODE].
The setting will change as follows each time
z
◄► is pressed.
STANDARD
GRAPHIC
DYNAMIC
The picture becomes suitable for
STANDARD
moving images in general.
The picture becomes suitable for
CINEMA
movie sources.
NATURAL The picture complies with sRGB.
The picture becomes similar to
DICOM SIM.
DICOM Part14 gray scale.
The picture complies with ITU-R
REC709
BT.709 Standard.
The light output is maximized for use
DYNAMIC
in bright areas.
The picture becomes suitable for
GRAPHIC
input from to the personal computer.
42
- ENGLISH
CINEMA NATURAL
DICOM SIM.
REC709
Note
Factory defaults are [GRAPHIC] for RGB system and
z
[STANDARD] for moving images.
DICOM is an abbreviation for "Digital Imaging and
z
Communication in Medicine", which is a standard for
medical imaging devices. Although the name "DICOM" is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
When <ENTER> button is pressed while a [PICTURE
z
MODE] other than [USER] is selected, the setting is
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.

CONTRAST

You can adjust the contrast of the projected image.
1 ) Press ▲▼ to select [CONTRAST].
2 ) Press ◄► or <ENTER> button.
The [CONTRAST] individual adjustment screen
z
will be displayed.
3 ) Press ◄► to adjust the level.
Operation Adjustment
Raises the picture
brightness and the
Press ►.
picture becomes
clearer.
Lowers the picture
Press ◄. brightness and
weakens the picture.
Attention
Adjust the BRIGHTNESS in advance if necessary.
z
Adjustment
range
Maximum
value 31
Minimum
value - 31