White Gain - Panasonic PT-DW530U Operating Instructions Manual

PICTURE menu
7 ) Press <ENTER> button.
The [WHITE BALANCE] screen will be
z
displayed.
8 ) Press ▲▼ to select [WHITE
BALANCE HIGH] or [WHITE
BALANCE LOW].
9 ) Press <ENTER> button.
The [WHITE BALANCE HIGH (or LOW)]
z
screen will be displayed.
10 ) Press ▲▼ to select [RED], [GREEN]
or [BLUE].
11 ) Press ◄► to adjust the level.
Item Operation
Press ►.
RED
Press ◄.
Press ►.
GREEN
Press ◄.
Press ►.
BLUE
Press ◄.
Note
All colors will not be displayed properly unless adequate
z
adjustment is made. If the adjustment does not look
suitable, you can press <DEFAULT> button to return the
setting for the selected item only to the factory default
setting.
The [COLOR TEMPERATURE] cannot be adjusted
z
for the internal test pattern (
project the input signal when adjusting the [COLOR
TEMPERATURE].
44
- ENGLISH
Adjustment
Adjustment
range
Maximum
Deepens red.
value
HIGH : 255
Weakens red.
LOW : 127
Deepens green.
Minimum
value
HIGH : 0
Weakens green.
LOW :
- 127
Deepens blue.
Default
HIGH : 255
Weakens blue.
LOW : 0
Æ
page 70). Be sure to
Changing the name of [USER]
J
1. Select [USER] in step 3).
2. Press <ENTER> button.
The [COLOR TEMPERATURE] screen will be
z
displayed.
3. Press ▲▼ to select [COLOR
TEMPERATURE NAME CHANGE].
4. Press <ENTER> button.
The [COLOR TEMPERATURE NAME
z
CHANGE] screen will be displayed.
COLOR TEMPERATURE NAME CHANGE
5. Press ▲▼◄► to select characters
and press <ENTER> button to input
them.
6. Press ▲▼◄► to select [OK], and
press <ENTER> button.
The color temperature setting name is changed.
z

WHITE GAIN

Adjusts the brightness of a white image.
1 ) Press▲▼to select [WHITE GAIN]
2 ) Press ◄► or <ENTER> button.
The [WHITE GAIN] control screen is displayed.
z
3 ) Press ◄► to adjust the brightness
level.
Operation Adjustment
Press ► Increases the image
button. brightness.
Press ◄ Displays the natural
button. image.
Adjustment
range
Maximum
value: 10
Minimum
value: 0