Oki CX3641MFP Installation Manual page 9

Step 3: Assemble the Stand
8 Leg Bolts with Lock Washers and Flat Washers for
Stand Legs
Accessories in the Stand Box
2 Screws with Lock Washers and Flat Washers for
CX3641 MFP 99.jpg
Bottom of Cable Clips
2 Screws with Lock Washers and Flat Washers for
Bottom of Printer Brackets
2 Thumb Screws for attaching the Printer to the
Bumper Brackets
4 Small Screws with Lock Washers and Flat Washers
for Top of Printer Brackets
16 Medium Screws with Lock Washers and Flat
Washers
2 Cable Clips for attaching DCD cable (see
"Accessories in Scanner Box""Accessories in Scanner
Box" on page 14) to the stand.
2 Bumper Brackets
3 Tie Wraps (to secure cabling)
2 Printer Brackets
2 Rubber Caps
2 Foam Bumpers
1. Unpack the stand, removing any shipping tape/
materials.
9